Refurbished 1046 Items

Eaton Moeller PKZM0-10 manual motor controller delivers adjustable motor protection with rotary handle operation, phase-failure sensitivity, and ambient-temperature-compensated performance for motor control applications.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

Emerson Ovation 5X00070G03 high-speed analog input module delivers 8 isolated voltage channels, 14-bit conversion, and configurable 50/60 samples per second acquisition for Ovation DCS data capture.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

VIAVI 3Z-RFV-AAT-2000 antenna alignment tool streamlines antenna and microwave alignment with an integrated touchscreen, onboard camera, GPS/GLONASS positioning, and Bluetooth connectivity for field-ready deployment.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

Emerson KJ3204X1-BK1 is a DeltaV digital output module with 32 high-side 24 VDC channels for distributed control and automation I/O applications.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

EXFO FTB-1v2 OTDR kit with installed FTBx-730C-SM8-OPM-EA module for fiber link testing, including iOLM operation and built-in PM/VFL hardware.

SKF TKSA 40 laser shaft alignment tool for horizontal single coupling alignment with soft foot check, alignment tolerance evaluation, internal result storage, and USB data transfer capability.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

Commtest vb7 vibration data collector for route-based machinery vibration measurement, spectrum and waveform analysis, balancing, and condition monitoring with firmware v2.1.8 and IMI ICP accelerometers.

Megger MOM3 handheld micro-ohmmeter rated up to 300 A for low-resistance measurement. Auto range covers 0.1 µΩ to 3000 mΩ with selectable 5–300 A test current. Battery-operated IP54 instrument with USB-C PC communication and pass/fail threshold setting.

The Emerson Ovation 5X00241G02 Processor Module is an industrial control system component designed for integration within Ovation distributed control system architectures. Identified by model number 5X00241G02, it functions as a processor module within compatible Emerson Ovation platforms.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

The Emerson KJ2003X1-BK1 SD Plus Controller is a DeltaV series industrial automation component designed for distributed control applications. It supports 12 VDC local bus power at 75 mA and 24 VDC bussed field power at 150 mA, with 24 VDC field circuit at 5 mA per channel. The controller operates in ambient temperatures from -40°C to +70°C and supports industrial vibration and shock tolerance ratings.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

The Radiodetection RD8100 PXL is a precision pipe and cable locator supporting 16 active frequencies, 4 kHz locating, Current Direction, and Power Filters for target identification in congested utility environments. This configuration includes the Tx-10 10W transmitter for active signal application and utility tracing.