Refurbished 1046 Items

he HYTORC LST-3000 Lithium Series II is a 36V battery-powered electric torque tool rated up to 3,000 ft-lb. It features a brushless DC motor, TorcSense™ direct torque measurement, and a high-resolution rear display for controlled tightening and loosening of industrial fasteners using conventional reaction-arm configurations.

The Radiodetection RD8200 Cable & Pipe Locator with Tx-10B Transmitter is designed for locating and tracing buried conductive cables and pipes. The system supports active signal application and passive detection modes, with on-screen signal strength indication and depth measurement in meters.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The Conair UTB-120S Universal Terminal Box is a centralized electrical connection point used in material loading systems. It operates on 120 VAC and is designed to interface a main loader control panel with multiple receiver or loader drop cables, simplifying system wiring and maintenance.

The Comau 10125260 Safety Relay Board is an industrial automation component used within Comau robotic control systems. It functions as a safety relay module designed to support safety monitoring circuits in industrial robotics applications operating with 24 V DC auxiliary power

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Vivax-Metrotech vLoc3 RTK-Pro is an RTK GNSS utility locator for precision locating and utility-classified survey capture. Surveys are organized by Electric, Gas, Communications, Potable Water, and Reclaimed Water utilities when used with the Loc3-25Tx transmitter.

The Megger MJÖLNER 200 is a portable micro-ohmmeter high current system integrated into a rugged hard case with on-board display and controls. The front panel provides DC+ and COM terminals, dedicated sense inputs, shunt output, current clamp input, and labeled interface ports for field testing configurations.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

The VeEX FX150 is a handheld optical time domain reflectometer configured with 1310 nm and 1550 nm singlemode wavelengths. The platform is capable of OTDR measurement, event analysis, trace review, and bundled Optical Power Meter (OPM), Optical Light Source, and Visual Fault Locator (VFL) operation for fiber testing workflows.

AEMC C.A 6240 digital micro-ohmmeter for precise low-resistance and contact resistance testing. 4-wire Kelvin measurement with selectable test currents up to 10A, 1 µΩ resolution, onboard memory, and DataView® software support.

Allen-Bradley 802X-B4 watertight limit switch with top push rod actuator and snap-acting 1NO/1NC contacts. Built for reliable position sensing in harsh industrial control applications.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.

Allen-Bradley 1489-M-C16A is a 3-pole 16A miniature circuit breaker with C-curve tripping for branch circuit protection in industrial control panels, supporting DIN rail mounting and UL 489 compliance.

HYTORC LST-2000 Lithium Series II torque tool with 36V battery drive, reaction arm, TorcSense torque measurement, and digital control interface for precision industrial bolting.

Olympus SA12-N55S-IHC wedge provides a 55° refracted shear wave for A12 probes with integrated irrigation ports, mounting points, and carbide wear pins for stable angle-beam coupling.