Control Components 220 Items

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

IPC 005-4240 power resistor delivers 110 ohm resistance with 800W heat dissipation for dynamic braking, load testing, and industrial energy control applications.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Champion TSW-12A-2P Power Switch Box delivers reliable dual AC power switching in a compact enclosure designed for controlled electrical distribution and system integration.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Eaton 9575H3A000 relay offers reliable DPDT switching for industrial control systems, featuring a 110/120V coil and heavy-duty performance for diverse AC/DC loads.

Eaton 6-22-2 restores performance in Citation Series Size 0 contactors with OEM 3-pole replacement contacts for reliable motor control and long-term durability.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.