Pomona 65 Items

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Pomona 6343 Basic Electronic Test Lead Kit delivers right-angle DMM probes, extended fine tips, and alligator adapters for safe, precise electronic testing across compatible digital multimeters.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 3789 BNC Male to Minigrabber Test Clip breakout cable enables fast, reliable signal access from BNC jacks to minigrabber clips for precise electronic testing and troubleshooting.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Pomona 2417 is a Size B shielded aluminum box with cover designed to house and protect electronic circuits. Its die-cast aluminum housing delivers durable EMI shielding in a compact enclosure.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

Pomona BNC cable ensures noise-free signal transfer with gold-plated contacts, PTFE insulation, and durable molded strain relief for lasting performance.

Pomona BNC antenna cable: 4 ft, gold-plated, noise-free, molded strain relief, and durable for reliable antenna connections.

Pomona 2249-C-36 BNC Antenna Cable delivers durable, noise-free 3 ft connections with gold-plated contacts and molded strain relief for reliability.

Pomona 2249-C-72 Antenna Cable: 6 ft BNC cable with molded strain relief, PTFE insulation, and gold-plated contacts for noise-free, reliable connections.

Pomona 5698 Universal Adapter Kit enables custom RF adapter configurations using SMA, BNC, TNC, and N interfaces. Designed for flexible signal interconnection with precision RF connectors.

Pomona 3542-0 insulated panel mount pin tip jacks provide secure .080 pin connections for test and measurement panels. Gold-plated brass construction supports reliable signal access in compact panel installations.

Pomona 3752 shielded miniature aluminum box with integrated BNC male-to-female connector. Designed for 50-ohm signal routing, shielding, and test circuit enclosure in RF and instrumentation setups.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.

Pomona 5519A replacement DMM test lead set designed for sheathed banana inputs on Fluke, HP, Tektronix, and Wavetek meters, featuring high-flex silicone wire, dual insulation, and IEC 61010 compliance.

Pomona 5144-48-2 SMD microtip test probe features a flexible stainless steel needle tip and 48-inch lead with stacking banana plug, designed for precise probing of surface-mount device contacts.

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.