Fluke 654 Items

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

Fluke 572-2 Infrared and Contact Thermometer measures from -30°C to 900°C (-22°F to 1652°F) with a 60:1 distance-to-spot ratio and dual laser sighting. Features adjustable emissivity, MAX/MIN/DIF/AVG display modes, and multi-language interface. Includes K-type bead probe, hard case, and USB cable.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke I40S-EL3X/3PK Clamp-On Current Transformer 3 Pack is designed for low current measurement applications up to 40 A. Each transformer measures accurately on 1 A and 5 A secondary current transformers and clamps onto conductors up to 15 mm in diameter.

The Fluke FLK-PTI120 9HZ 400C Pocket Thermal Imager is a rugged handheld infrared camera with 120 x 90 resolution and a -20°C to 400°C measurement range. It features a 3.5" LCD touchscreen with IR-Fusion™, Wi-Fi connectivity, Asset Tagging, IP54 protection, and 1-meter drop rating.

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

Fluke FPC1S-MDA-500-1 Premium Care provides one year of service coverage for MDA-500 Series test tools. Coverage includes annual calibration or performance check, repair services with parts and labor, expedited freight, accessory replacement, software updates, and priority technical support. No loaner units included.

The Fluke FLK-393FC-PVLEAD Clamp Meter Bundle includes the 393 FC CAT III 1500 V True-RMS clamp meter with iFlex probe and Pomona PVLEAD1 and PVLEAD3 solar PV test lead sets. It measures up to 1500 V DC, 1000 V AC, and 999.9 A AC/DC, with up to 2500 A using the iFlex probe.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The Fluke 700HTH-1 Hydraulic Test Hose is rated for 10,000 psi (690 bar) working pressure and is designed for use with the Fluke 700HTP-1 hydraulic test pump. Constructed from stainless steel and nylon, it features self-sealing fittings with finger-tight connections. The hose supports connection to both a Fluke pressure module and a calibration unit under test simultaneously and is compatible with water and non-corrosive oil.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

Fluke FLUKE-CV401 is a 4 in (95 mm) ClirVu® infrared window with security key door latch for electrical inspection applications. It features AutoGround™ integrated grounding, IP67 environmental protection, and arc testing to 63 kA per IEEE C37.20.7 at KEMA.

Fluke 700G/TRACK Data Logging Cable and Software for use with 700G Series gauges. Enables data download and logging configuration for remote logging events. Configure reading rate, duration, and measurement units, and upload logged measurements for display or export. Includes communication cable for PC connection.

The Fluke I17XX-FLEX3KIP/4PK includes four 24 in (60 cm) flexible current probes rated to 3000A AC. Designed for use with Fluke 1742, 1746, and 1748 energy and power loggers, the probes connect directly to compatible 174x series instruments for current measurement display without scaling factors.

The Fluke I17XX-FLEX6000/4PK includes four 36 inch iFlex flexible AC current clamps rated to 6000 A AC. Designed for use with Fluke 1736 and 1738 Energy or Power Loggers, these Rogowski-style probes connect directly to the instrument and display measurements without scaling factors.

Fluke I17XX-FLEX6000/3PK iFlex flexible current clamp kit includes three 36 in flexible Rogowski-style probes rated to 6000 A AC. Designed to connect directly to Fluke 173X Energy or Power Loggers, the probes provide expanded AC current measurement capability without external scaling factors.

The Fluke I17XX-FLEX3000/4PK includes four 24 in iFlex® flexible AC current probes rated to 3000 A AC. Designed for use with Fluke 17XX Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument and feature 1.8 m output cables for measurement flexibility.

The Fluke i17XX-FLEX3000/3PK is a three-pack of 24 inch iFlex® flexible current probes rated to 3000A AC. Designed for use with compatible Fluke 17XX Series Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument for expanded high-current measurement capability.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.