Fluke 654 Items

Fluke 54 II B Dual Input Data Logging Thermometer measures J, K, T, E, N, R, and S thermocouples with dual inputs and true differential capability. Logs up to 500 data points with adjustable intervals and supports IR USB export.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Fluke A604510350 GEO Ground Earth Stake is an earth stake accessory designed for use with compatible Fluke ground resistance testers. This metal stake supports grounding and earth resistance testing applications and is identified as the GEO Earth Stake model.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The Fluke 53-II B is a single input digital thermometer designed for contact temperature measurement using J, K, T, E, N, R, and S thermocouples. It logs up to 500 temperature readings at user-adjustable intervals and includes a real-time clock for time-stamped data review.

The Fluke 179 True-RMS Digital Multimeter Electronics Kit supports electrical and electronic troubleshooting with voltage, current, resistance, frequency, capacitance, continuity, diode, and temperature measurements. The kit includes SureGrip accessories, a magnetic hanger, and a soft carry case for organized field use.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

The Fluke TL1550EXT is a 25 ft extended test lead set designed for use with compatible Fluke insulation resistance testers. The set includes three color-coded leads with low-leakage probes and matching alligator clips, supporting extended reach during insulation resistance testing.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

Special value kit for electrical professionals looking to add DC and AC current measurement capability to their digital multimeter. Includes a Fluke i410 AC/DC current clamp and a roomy zippered vinyl carry case with movable divider and storage for test leads, probes, and manuals.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke PTi120 is a rugged pocket thermal imager designed for industrial inspection. It features a fully radiometric 120 x 90 infrared sensor, 3.5-inch LCD touchscreen, IR-Fusion™ imaging, and a -20 °C to 150 °C temperature measurement range in a compact, portable form factor.

The Fluke 52 II dual probe digital thermometer measures two contact temperature inputs simultaneously using J, K, T, or E-type thermocouples. It provides laboratory accuracy, a large backlit display, and MIN, MAX, and AVG tracking for professional temperature measurement.

The Fluke 971 Temperature Humidity Meter is a handheld instrument for measuring air temperature, relative humidity, dew point, and wet bulb temperature. It features a backlit dual display, 99-point data storage, Min/Max/Avg functions, and a quick-response capacitance sensor for indoor air quality assessment.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Fluke 729 Pro 7M Automatic Pressure Calibrator is a portable calibrator with an internal electric pump for automatic pressure generation and regulation up to 1000 psi. It supports pressure calibration, pressure measurement, voltage measurement, and mA sourcing with built-in HART communication.