Search results for: 'module'

Westinghouse 1C31129G03 Ovation diagnostic analog output module for Ovation control system installations. Includes one plug-in module as shown.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

The Emerson Ovation 5X00241G02 Processor Module is an industrial control system component designed for integration within Ovation distributed control system architectures. Identified by model number 5X00241G02, it functions as a processor module within compatible Emerson Ovation platforms.

The Thermo Environmental 2200-0-010 Heater Control Module (P/N 22000010) is an industrial control board designed for regulated heater management within environmental and analytical systems. This module functions as a temperature control component in Thermo Environmental instrumentation platforms.

The Yamatake Honeywell J-MHM10 is an industrial system interface module used in distributed control and automation environments. Manufactured in Japan, it operates on DC 5V at 1.08A with optional DC 24V at 320mA support, and is designed for integration within industrial control systems.

Westinghouse 1C31129G32 Ovation analog output module with 0-10V analog output labeling. Industrial control module for Ovation system applications. Module only.

The Telemotive E7160-101 Radio Remote Control Receiver Module is a board-level component used within compatible Telemotive industrial radio control receiver assemblies. It functions as a receiver module in fixed-station radio control systems for industrial equipment integration.

The Ovation 5X00226G03 is an I/O Interface Module designed for use within Ovation DCS systems. Manufactured by Emerson, this module supports industrial control applications and is identified under model number 5X00226G03. Product weight is 0.34 kg with listed dimensions of 12.1 × 5.2 × 16.6 cm.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

Yamatake-Honeywell J-DIM00 is a DC 24V digital input module for AMC automation systems, enabling reliable field signal monitoring and seamless integration with compatible industrial and marine control platforms.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

The ABB NASM01 Analog Slave Module is designed for use in ABB Bailey Network 90 and INFI-90 distributed control systems. It functions as an analog input slave module, processing incoming analog signals from field devices for industrial process control and monitoring applications.

Phoenix Contact 5604123 is a VARIOFACE passive module providing 16-channel fused output for structured signal interfacing between control systems and field wiring.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

The Mitsubishi A1SG60 is a blank slot cover dummy module for MELSEC-A series PLC base units. It fills unused slots to protect internal components, reduce exposure to dust or foreign objects, and help maintain system stability when vacant slots are present.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

AEG 029.044.297 PLC Control Module PC Board designed for integration within AEG programmable logic controller systems, providing internal control functionality in modular industrial automation environments.

Metso Automation IOP332 digital input module for Valmet control systems, designed to monitor 120V AC/DC binary field signals from industrial devices with reliable I/O processing and diagnostics.

Transmation 3510T-03-06-07-65-71-72 3510T current transmitter module designed for industrial signal conditioning. Converts input signals to a standardized 4–20 mA DC output for reliable process control transmission.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.