Search results for: 'Testers'

Fluke Networks VERSIV2 Mainframe and Remote Unit delivers faster network certification workflows with built-in WiFi, higher memory, and module compatibility.

Fluke Networks ADP-SC/APC SC-APC simplex adapter provides reliable fiber connections for CertiFiber Pro, enabling fast, durable testing of SC/APC links.

Fluke Networks FI-500TP-ASCF adapter tip for SC APC bulkhead connectors, designed for FI-500TP FiberInspector Micro to ensure precise and reliable fiber inspection.

Fluke BKC-MPO-ULC Fiber Cable: 1 m MPO to LC breakout cord, reliable network compatibility, ideal for MultiFiber Pro testers and fiber installations.

Fluke SM 9UM launch cord ensures accurate OTDR testing with single-mode SC/APC connectors, delivering reliable fiber optic network measurements.

Fluke MS-IE-Adapter Set: Create complete wire maps, detect miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Fluke Networks GLD3-DSX-ADD Gold Support delivers 3 years of parts and labor maintenance for DSX-ADD, including calibration, repairs, software updates, loaner equipment, and 24/7 technical support.

Fluke Networks GLD-DSX-8000MI Gold Support provides one year of parts and labor coverage, annual calibration, software updates, repair service, and 24/7 technical support for DSX-8000MI cable testers.

Fluke Networks MS-POE-KIT: Handheld cable tester for PoE, twisted pair, and coax networks, with wiremap, length measurement, and IntelliTone cable detection.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.