Search results for: 'used li'

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Wohler 3674 Glass Dome supports clear viewing and proper fit for compatible 40mm pan and tilt camera head inspection systems, helping maintain visual access in remote visual inspection workflows.

Wöhler 2641 Protection Sleeve with cutout is made for 1.5-inch camera heads, adding protective coverage and cutout clearance for visual inspection work.

Wöhler PTFE Cone for Thin Tubes is a compact probe accessory for narrow-tube measurement setups, pairing PTFE construction with a cone-style fit for precise work in confined access points.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

Wohler Large Replacement Mirror, 6 x 3 x 0.12 in, with AR coating. Replacement mirror for Wohler 51631 and 8087 microscope applications.

The Wohler 3332/3337 GRP Rod Stainless End Piece keeps rod systems ready for dependable service with a durable Ø0.43 stainless steel replacement built for repair and maintenance.

Wohler Viper XXL Cleaning Rod System delivers high-stability sweeping for large chimneys, pipes, and ventilation ducts with a 0.4" GRP rod, abrasion-resistant PA jacket, and metric marking.

The Wohler 3827 Guidance Sleeve supports 1-inch camera head inspection work by helping maintain smoother travel through pipe, vent, and flue inspection paths.

WOHLER 2942 Snap & Sweep Chimney Drill Adaptor connects chimney cleaning systems to a cordless screwdriver for faster, more efficient rotary cleaning performance in chimney maintenance workflows.

The Wöhler 3850 Centering Brush helps keep Wöhler VIS 500 and VIS 700 camera heads centered during pipe inspection work, supporting smoother guidance through the inspection path.

Used Sonatest L15K12A, 15 MHz, 12 mm single element compression probe for high-resolution flaw detection and thickness gauging in thin materials. Compatible with Sonatest Wave, Masterscan 700M, Sitescan D-50. Request a quote or contact us today.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Research-Cottrell RK-1300-CSA TRC interface board for use with SCR firing assemblies in electrostatic precipitator transformer-rectifier power control systems.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Wohler Car Charger for VIS 200, VIS 300, and VIS 400 cameras delivers vehicle-based charging in a compact, travel-ready format for dependable power on the go.

WOHLER GRP Rod Repair Kit 9mm for Large Viper supports rod-end replacement and maintenance for compatible Large Viper setups with a compact repair component and included Allen wrench.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.