Search results for: 'Current'

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke I17XX-FLEX1500 iFlex flexible AC current clamp measures up to 1500A AC and connects directly to compatible Fluke power and energy loggers, enabling easy installation on large conductors.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

Eagle Eye LB-480-100-CCD delivers 480V, 100A constant-current DC load testing with auto-sensing voltage, adjustable discharge current, internal data saving, 5" LCD control, and data management software.

Fluke i3000s Flex-36 AC Current Clamp measures up to 3 kA with flexible probe for tight spaces, ideal for oscilloscopes, recorders, and data loggers.

Fluke I800 Clamp Probe: Extend DMM current measurement up to 800A AC with high accuracy, CAT III 600V safety, and wide 30Hz–10kHz frequency range.

Fluke I2500-10 iFlex flexible current probe measures up to 2500A AC, delivering accurate readings on large or hard-to-reach conductors.

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

The Fluke I17XX-FLEX3KIP/4PK includes four 24 in (60 cm) flexible current probes rated to 3000A AC. Designed for use with Fluke 1742, 1746, and 1748 energy and power loggers, the probes connect directly to compatible 174x series instruments for current measurement display without scaling factors.

Fluke I2500-18 flexible AC current probe enables accurate 2500A measurements with thin Rogowski coil design for tight spaces and hard-to-reach conductors.

Fluke 80i-2010S measures up to 2000A AC/DC on large conductors, enabling safe current testing without disconnecting the load.

Fluke flexible current probe delivers accurate 6000A AC measurement for 430 Series II power quality tools, ideal for advanced electrical testing.

Eagle Eye Power Solutions SLB-Series Smart DC Load Bank Standard delivers programmable constant current battery discharge testing with integrated monitoring, data logging, and wide standard voltage coverage from 10V to 576V.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

Fluke I17XX-FLEX6000/3PK iFlex flexible current clamp kit includes three 36 in flexible Rogowski-style probes rated to 6000 A AC. Designed to connect directly to Fluke 173X Energy or Power Loggers, the probes provide expanded AC current measurement capability without external scaling factors.

The Fluke I17XX-FLEX3000/4PK includes four 24 in iFlex® flexible AC current probes rated to 3000 A AC. Designed for use with Fluke 17XX Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument and feature 1.8 m output cables for measurement flexibility.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

Fluke I5S-PR: Compact 5A AC current clamp delivers accurate, non-intrusive measurements for Fluke 1750 Power Recorder and ScopeMeter tools.

Bussmann LPJ-30SP delivers 30A Class J circuit protection with LOW-PEAK dual-element time-delay performance, current limiting design, and 600VAC or less rating.