Search results for: 'industrial'

AEMC PowerPad IV 8345 Analyzer: Class A three-phase power quality analyzer with touch LCD, transient capture, energy valuation, and remote control.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

Fluke 376FC True-RMS Clamp Meter delivers wireless AC/DC current and voltage measurements up to 1000A with iFlex probe and Fluke Connect support.

Fluke 28IIEX/ETL intrinsically safe multimeter built for hazardous sites, offering true RMS accuracy, IP67 protection, and full industrial measurement capability.

Fluke 1507 insulation tester delivers advanced megohm measurements, multiple test voltages, PI/DAR calculations, and safety features for industrial electricians.

Fluke 1734/B Energy Logger: Accurately log three-phase electrical data with Fluke Connect, Wi-Fi, and Bluetooth for real-time energy monitoring.

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

AEMC C.A 1727 Digital Tachometer: Contact/non-contact RPM and speed readings with USB data transfer, 4000-point memory, and high-accuracy performance.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

Fluke 279FC/IFLEX thermal multimeter combines TRMS measurement with built-in thermal imaging, iFlex current capability, and wireless Fluke Connect reporting.

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.

AEMC 205 Power Clamp-On Meter: TRMS readings for AC/DC volts, amps, power, THD & phase. Built for tough jobs with flame-retardant body & IP54 rating.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!

Fluke VPS421-B 100:1 Voltage Probe Set – High-precision, 150MHz bandwidth, CAT IV 600V rated. Ideal for high-voltage troubleshooting!

Fluke i17XX-FLEX1500 24: Measure up to 1500A with ease! Flexible, durable, and perfect for accurate power logging. A must-have tool for precise energy analysis

The Amprobe PRM-6 Phase Sequence and Motor Rotation Tester verifies 3-phase wire sequence and motor rotation direction in commercial and industrial electrical systems. It supports phase-to-phase voltage measurement up to 700 V and features non-contact wireless motor rotation detection for running motors. A backlit LCD display provides clear indication of phase rotation and error conditions. Rated CAT IV 600 V, the PRM-6 is designed for use on electrical systems requiring reliable phase sequence and rotation confirmation.

Fluke 1587 MDT FC kit combines insulation testing, True-RMS multimeter functions, AC current measurement, and phase rotation checks for advanced motor diagnostics.

The Fluke 375 FC is a high-performance wireless clamp meter featuring True-RMS measurements, AC/DC current to 600 A (up to 2500 A with optional iFlex), voltage to 1000 V, VFD low-pass filter and remote data capability — designed for industrial diagnostics.

The AEMC OX 5042B Handscope Oscilloscope is a compact, rugged, three-in-one instrument offering oscilloscope, multimeter, and harmonic analysis capabilities all in a single handheld device. Ideal for field work and industrial environments, it delivers reliable performance with intuitive operation and a crisp color display.