Megger DLRO10 Digital Low Resistance Micro-Ohmmeters 1006-598

Manual, Auto, Continuous, Inductive

Fully Automatic

<3s for forward and reverse current and to display average

4.5 digit seven segment LED

Single cycle reversing d.c. ratiometric measurement -  average result display.

±10%

<10 ppm per second

Maximum 100 mΩ total for 10 A operation irrespective of battery condition.

>200 kΩ

Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads. Warning will show if hum or noise exceeds this level.

5.2 lithium ion rechargeable

Typical 1300 x 10 A tests before recharge

Via external 90 V - 260 V 50/60 Hz charger from 12 to 15 V dc supply

Standard: 2.5 hours to 90% capacity, 4 hours to fully charged

Slow Charge: +10 °C to + 45 °C (50 °F to 113 °F)

+5 °C to +45 °C (41 °F to 113 °F) at full accuracy

-10 °C to +50 °C (14 °F to 122 °F) at reduced accuracy

<90% RH @ 40 °C (104 °F) non-condensing

-30 °C to +70 °C (50 °F to 113 °F)

<90% RH @ 40 °C (104 °F) non-condensing

<0.01% per °C, over range 5 °C to 40 °C (<0.0006% per °F from 41 °F to 104 °F)

2000m (6562 ft) to full safety specifications

In accordance with IEC61010-1, CAT III 600 V - only when DH6 leads are used.

IP65 case closed, IP54 battery operation In accordance with IEC61326-(Heavy industrial)

220 x 100 x 237 mm

2,6 kg including battery