Search results for: 'its'

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

The AMLOC 120-4416 is a high-temperature capacitance sensor assembly used within AMLOC Energy Management Systems for desiccant air dryers. It interprets capacitance signals associated with moisture loading in the desiccant bed to support energy-managed dryer operation.

The Fluke 810 Vibration Tester is a handheld diagnostic instrument for identifying mechanical vibration faults in rotating equipment. Using tri-axial measurement and on-device analysis, it reports fault type, location, and severity during field testing.

Valco Melton 765XX125 Valve Module Assembly delivers controlled fluid actuation for industrial adhesive and dispensing systems, supporting precise flow regulation within automated production environments.

Fluke MDA-550/FPC Motor Drive Analyzer: 4-channel, 500 MHz testing with guided setup, preset profiles, and built-in professional report generation.

Banner QS30EDVQ diffuse-mode photoelectric sensor with visible red 660 nm beam and bipolar NPN/PNP outputs offers fast response and reliable 1400 mm detection for industrial automation.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

Banner LM3 photoelectric sensor logic module delivers ON-OFF logic with LIGHT/DARK operate selection for MULTI-BEAM 3- and 4-wire sensors.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

Square D 9013GSG2J25 pressure switch with a 60 psi ON and 80 psi OFF setting shown on the box label. Mechanical pressure-actuated switch in a gray enclosure with threaded pressure port.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

The Mazak R26ZZ004340 Tool Data Read Head Sensor (model CIT3ASX1N12ST) is used in Mazak CNC machines for tool data identification and management. This M12 cylindrical sensor functions as a read/write head supporting automated tool handling and tool information tracking within compatible machining systems.

The Mitsubishi FR-A7N-ETH is an internal Ethernet communication option card for Mitsubishi 700-series adjustable speed drives. It provides multiprotocol Ethernet connectivity for industrial automation networks and supports configuration and monitoring through an embedded web server interface.

Omega CN78030 delivers precise PID temperature and process control in a compact 1/16 DIN format, featuring relay output, universal sensor input, RS485 communication, and advanced autotune and fuzzy logic control.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

Allen-Bradley 1336-CAP-SP3-A DC bus capacitor assembly designed for 460V 1336 PLUS, FORCE, and IMPACT drives. Supports stable DC bus operation in compatible 25–30 HP drive systems.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.