Programmable Logic Controllers (PLCs) 133 Items

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

The Honeywell C-HPE00 is a rack-mounted control system module used in Honeywell industrial automation environments. The unit consists of a metal card cage assembly with integrated backplane slots and an attached interface board. This listing includes only the hardware shown.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

The Yamatake Honeywell J-MBU00 is a modular base unit designed as a physical mounting and backplane chassis for compatible control or I/O modules. This unit provides slot-based connectivity within a larger industrial automation system. Delivered as the base unit only.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

The Yamatake Honeywell J-MHM10 is an industrial system interface module used in distributed control and automation environments. Manufactured in Japan, it operates on DC 5V at 1.08A with optional DC 24V at 320mA support, and is designed for integration within industrial control systems.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

The Phoenix Contact RAD-ISM-900-XD-BUS is an OMNEX industrial wireless transceiver module operating in the 900 MHz ISM band. It supports bidirectional wireless transmission of digital and analog I/O signals and mounts on a DIN rail with an integrated bus foot for I/O expansion.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

Allen-Bradley 1771-A1B/B is a 4-slot PLC-5 I/O chassis designed to house processors, power supplies, and 1771 I/O modules, providing reliable backplane connectivity for panel-mounted industrial control systems.

AEG Modicon PC-A984-130 is a compact PLC CPU delivering reliable Modbus control, 4K user logic memory, and fast 5 ms/k scan time for Modicon 984 automation systems.