0.0
0 Reviews
One year warranty

Fluke Networks LinkIQ Advanced Kit with IntelliTone Pro 200 Cable & Network Tester with Remote IDs #1–7

SKU: CART-05693
Model: LIQ-KIT
Product Condition: Certified Pre-owned
$2,199.95

Fluke Networks LinkIQ Advanced Kit (LIQ-KIT) is a cable & network tester that validates twisted-pair cabling performance up to 10GBASE-T using frequency-based measurements. It provides graphical wire map, distance-to-fault diagnostics, and nearest switch information. This kit includes an IntelliTone™ Pro 200 Probe and Remote IDs #1–7 for cable identification and port tracing.

Read more
Estimated delivery: 3 days
One year warranty
Free return within 30 days of purchase.
Contact
Have a question ? Ask an expert
Live chat (833) 322-7865 Email
Browse by category:
Fluke Networks Cable Verifiers & Qualifiers Copper Testers Network, Cable & Fiber Testers
Product Description

Fluke Networks LinkIQ Advanced Kit Cable & Network Tester (LIQ-KIT)

Fluke Networks LinkIQ Advanced Kit is a cable & network tester designed for copper cabling qualification and network diagnostics in structured cabling environments. Frequency-based measurements validate cable performance up to 10GBASE-T and display graphical wire map and distance-to-fault information for installed links.


Cable Qualification & Fault Diagnostics

  • Qualifies cabling performance from 10BASE-T through 10GBASE-T
  • Graphical wire map identifying miswires, split pairs, opens, and shorts
  • Distance-to-fault measurement up to 305 m (1000 ft)
  • User-set performance limits with pass/fail indication
  • Internal storage of up to 1,000 test results

Network & PoE Diagnostics

Nearest switch diagnostics display switch name, port number, VLAN information, advertised data rates, and duplex settings using LLDP and CDP protocols. IPv4 and IPv6 ping testing supported. IEEE 802.3af/at Power over Ethernet verification includes loaded voltage and loaded power measurements.


Remote Identification & Cable Tracing

  • Remote IDs #1–#7 enable identification of up to seven terminated outlets or patch panel ports
  • Sequential port mapping supports documentation of multi-drop or distributed cabling runs
  • IntelliTone™ Pro 200 Probe supports digital and analog cable tracing in active and inactive networks
  • CIQ-RJA Universal Network Adapter supports RJ45 connectivity and modular interface access
Specifications
Specifications
MPN LIQ-KIT
Product Condition Certified Pre-owned
Shipping Length (in.) 18
Shipping Width (In.) 14
Shipping Height (In.) 8
Condition Type Certified Pre-Owned
Item Returns This item can be returned
Product Type Cable & Network Tester
Cable Qualification Speeds 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T
Commissioning Autotests 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire Map Only
Maximum Cable Length 305 m (1000 ft)
Supported Cable Types Balanced twisted-pair; Unshielded twisted-pair (UTP); Screened twisted-pair (STP); 2-pair and 4-pair cabling
Wire Map Diagnostics Miswires, split pairs, opens, shorts, breaks; user-selectable T568A or T568B; straight-through, half-crossover, full-crossover
Distance to Fault Displays distance to termination, open, or short
Test Port Shielded 8-pin modular jack accepting 8-pin modular (RJ45) plugs
Network Diagnostic Protocols LLDP (Link Layer Discovery Protocol), CDP (Cisco Discovery Protocol), Fast Link Pulses (FLP)
Nearest Switch Information Switch name, port number, VLAN name, advertised data rates, advertised duplex
IP Testing IPv4 and IPv6 Ping
Power over Ethernet Compatibility IEEE 802.3af/at; hardware negotiation with signature resistance; software negotiation via LLDP/CDP
PoE Diagnostics Advertised power class; advertised available power; powered pairs; single and dual signature diagnostics
PoE Measurements Loaded voltage (V); loaded power (W)
Tone Generator Digital tones compatible with IntelliTone™ probes; analog tones compatible with general analog probes
Remote ID Support Supports identification of up to 7 remote ID terminations
Result Storage Up to 1,000 test results stored internally
Host Interface USB Type-C (data export, software updates, charging)
Display 800 × 480 color capacitive multi-touch
Battery Type Lithium-ion, 3.6 V, 6400 mAh
Battery Life 8 hours typical
Charge Time 4.5 hours typical
Operating Temperature 0 °C to 45 °C
Storage Temperature -20 °C to 50 °C
Operating Relative Humidity 0–90% (0 °C to 35 °C); 0–70% (35 °C to 45 °C)
Operating Altitude 4,000 m; 3,200 m with AC adapter
Dimensions 8.5 in × 4.5 in
Weight 1 lb 6 oz (624 g)
What's in the box?
  • 1 x Fluke Networks LinkIQ Cable + Network Tester
  • 1 x Charger w/ Universal Heads
  • 1 x Fluke Networks Intellitone Pro 200 Probe
  • 1 x Fluke Networks Remote ID 1-7
  • 1 x Fluke Networks CIQ-RJA Universal Network Adapter 
  • 1 x LinkIQ Cable + Network Tester Safety Information 
  • 1 x Soft Carry Case
  • 1 x Shoulder Strap
Technical Resources
Related Posts

No Related Posts

Reviews
Write Your Own Review
You're reviewing: Fluke Networks LinkIQ Kit w/ IntelliTone Probe & Remote IDs 1–7
loader
Loading...

You submitted your review for moderation.

Trustpilot

Related Products

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.