Electrical Components 472 Items

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Phoenix Contact QUINT-PS/1AC/24DC/10 DIN-rail power supply provides 24 V DC (adjustable 18–29.5 V) at 10 A from a wide-range 1-phase AC or DC input. Includes DC OK signaling, BOOST indication, and SFB technology support.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

SolaHD SCP100S24X-CM delivers regulated 24VDC power for harsh environments, combining IP67 protection, universal AC/DC input, and Class 2 output in a compact chassis-mount industrial power supply.

Allen Bradley 100S-C09EJ32BC IEC safety contactor with 9A AC-3 rating and 24V DC electronic coil. Designed for safety feedback circuits using mechanically linked mirror contacts.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.

Allen-Bradley 1489-M1C250 is a 25A UL489-listed 1-pole DIN-rail circuit breaker with C-curve thermal-magnetic protection, designed for reliable branch circuit protection in industrial control panels.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.