Construction 53 Items

For use with the M2000 tester, the Wall Tie Spacer Bridge enables the testing of remedial wall ties when fitted with a threaded rod adaptor.

Suitable for testing ETIC fixings (External Wall Insulation Fixings) with the M2000 Tester.

The heavy-duty ringbolt clevis is suitable for pad eye load testing, large ringbolt and large eyebolt testing. For use with the M2008

For use with the Model 2000 (pre March 2020), M2000 and M2050 and is fitted into the tester body when using the bolt tester adaptor, clevis adaptor and insulation adaptor.

Gripple GS12-10S5-R5-2P seismic restraint kit delivers a ready cable-bracing hardware set with 1/8 in x 10 ft cable, GS12 fasteners, standard end fittings, and retrofit structural eyelets.

Eaton BPS1 metal protector plate supports box mounting and rough-in electrical installations with one-device plaster ring style construction in the Eaton B-Line series. Lot of 39 pieces.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

Crouse-Hinds 4 B conduit hangers provide steel mechanical support for 1-1/2 in rigid/IMC conduit and EMT or rigid/IMC runs in a with-bolt design. Pack of 100 for installation stock and project supply.

PDQ 6200R-01 wide stile rim exit device for 36" doors in US32D finish. Panic rated, reversible, and built for commercial duty applications.

The PLS 180R RBP KIT Cross Line Red Laser Level Kit provides a self-leveling cross line laser with ≤1/8 in accuracy at 30 ft (≤3 mm @ 10 m). It features a 180° horizontal fan angle, 130° vertical fan angle, pendulum lock for transport protection, IP54 rating, and includes rechargeable and alkaline battery packs with mounting accessories.

The PLS PLS 5R KIT 5-Point Red Laser Kit is a self-leveling five-point red laser level designed for plumb, level, and square horizontal and vertical point layout. It features a durable pendulum lock platform with tilt mode functionality and delivers accuracy of ≤1/8 in at 30 ft (≤3 mm @ 10 m). The kit includes a floor stand, magnetic L-bracket, pendulum target, red reflective target, battery pack, and carrying pouch.

The PLS 5R is a self-leveling five-point red laser level designed for layout, alignment, and squaring tasks. It projects plumb, level, and square reference points and features a pendulum lock for transport and tilt mode operation. Supplied as a bare tool with pouch and battery pack.

The PLS 3G KIT is a self-leveling 3-point green laser level designed for fast plumb reference layout. It projects up, down, and forward points with ≤1/8 in accuracy at 30 ft and includes mounting accessories for floor, wall, and magnetic attachment applications.

The PLS 180R cross line red laser level provides horizontal and vertical laser reference for layout and installation tasks. It features a 180° horizontal fan angle, 130° vertical fan angle, self-leveling operation, pendulum lock, and IP54-rated enclosure for job site use.

The PLS 3G Z is a self-leveling three-point green laser level designed for fast, accurate plumb layout. It delivers ≤1/8" accuracy at 30 ft and features a pendulum lock for controlled alignment. Includes laser, canvas pouch, and BP5 alkaline battery pack.

PLS 3R Z 3-point red self-leveling laser level delivers fast plumb reference points with ≤1/8 inch accuracy at 30 feet. Designed for precise layout with pendulum lock control.

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

Leica Piper 100 3R red beam pipe laser with IRPL200 remote, target assembly with reflective inserts, and 150 mm self-centering feet for accurate line and grade alignment in sewer and utility pipelines.