Search results for: 'Current'

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

AEMC MiniFlex® MA193-10-BK — Flexible Current Sensor, Measures up to 3000AAC, Includes a compact 2.75” clamp, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series products.

AEMC LM103 AC Current Probe, 200A range, 1mV/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, compatible with power analyzers & DMMs.

AEMC SR193-BK AC Current Probe: 1200A capacity, 10ft lead, 0.3% accuracy—perfect for PowerPad, PEL Series, L104 & L564 for high-precision AC current measurement.

Compact AEMC MN02 AC current probe with 100A range, 1mA/A output, 1% accuracy and a 5 ft lead — Ideal for low-power and industrial current measurements.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

Fluke 718Ex 30 intrinsically safe pressure calibrator delivers accurate 30 PSI gauge pressure testing with a built-in hand pump, current measurement, and ATEX-rated safety for hazardous-area calibration work.

AEMC SR759 AC current probe with selectable ranges (1A–1000A), mV/A output, 5 ft lead. High accuracy and sensitivity for power quality and low current use.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

Fluke 301D-R AC/DC Clamp Meter delivers up to 600A current measurement in a slim, handheld design with a thin 10 mm jaw, backlit display, and essential electrical test functions for tight spaces.

The Moore Industries DCA/4-20MA/SH2/117AC-DPDT-GP is a DC current alarm trip module designed to monitor a 4–20 mA process signal and actuate relay contacts when a high alarm setpoint is exceeded. It operates on 117 VAC power and provides DPDT relay outputs for alarm signaling.

Fluke FLUKE-323 CAL Clamp Meter: Rugged True RMS tool for electricians, measuring AC/DC voltage, AC current up to 400 A, resistance, and continuity.

SolaHD SDN 10-24-480 DIN Rail Power Supply delivers 24 VDC output at 10 A from a 380-480 VAC three-phase input, with adjustable 24-28 VDC output, parallel capability, and DIN rail mounting for industrial control systems.

The Fluke 87V MAX E2 Kit offers a rugged true-RMS multimeter with an IP67 rating, 4 m drop protection, long battery life, and essential insulated accessories for industrial use.

Fluke 1587 MDT FC kit combines insulation testing, True-RMS multimeter functions, AC current measurement, and phase rotation checks for advanced motor diagnostics.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, measures AC current up to 1000A with 1mV/A output—ideal for tight, irregular spaces.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.