Search results for: 'tests test'

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks P4480004 replacement line cord designed for TS52, TS44, and TS42 test sets. Features a durable braided cable and integrated 346A plug for reliable field testing instrument connectivity.

Fluke TLPV1 MC4 to 4mm test lead set enables safe, accurate measurements on MC4-connected solar PV systems using 4mm banana plug instruments, with included MC4 disconnect tool.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona 5830-0 Flexible Maxigrabber Test Clip delivers secure electrical testing with a rotating pincer contact and standard banana jack termination. Designed for custom leads using 18–22 AWG wire.

Pomona 5672A test lead kit delivers flexible silicone leads, right-angle banana plugs, insulated alligator clips, and extended probe tips for safe DMM testing.

Amprobe TL35B test leads connect compatible meters to devices with PVC-insulated leads, threaded probe tips, and secure alligator clips.

Fluke Networks MFTK-DC SM test kit enables fast MPO single-mode fiber certification at 1310/1550 nm, inspecting, cleaning, and testing all 12 fibers in seconds.

Fluke 1623-2 Earth Ground Tester delivers accurate ground resistance and soil resistivity testing with 3- and 4-pole methods, stakeless clamp testing, USB data storage, and rugged IP56 protection.

Fluke Networks TRC Fiber Optic Cord: Durable metal LC connectors for OTDR testing, 62.5 µm multimode cable ensures precise, reliable measurements.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

Amprobe DL248D Deluxe Test Lead Kit delivers silicone 48-inch leads with interchangeable probes, clips, and lugs for reliable electrical testing and diagnostic flexibility across compatible measurement instruments.

Fluke Networks P3218028 line cord with angled piercing pin clips enables testing of insulated telephone wires with compatible TS series test sets.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

The Fluke Networks 25501004 TS25D test set features a 346A plug, high-impedance monitor mode, caller-ID, polarity and voltage indication, tone/pulse dialing and a rugged field design. It is suited for installing and maintaining voice-grade telephone lines.

Fluke TLK290 probe set: Flexible sockets and alligator clip for safe, precise testing of motors, 3-phase plugs, and 4–8 mm connections.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Fluke 700PTPK Pneumatic Test Pump Kit generates precise pneumatic pressure from -12.7 psi to 600 psi for reliable field testing and calibration.

Fluke Networks SRC-9-SCST: 2m singlemode fiber optic test cord with SC/ST connectors for accurate optical testing and dependable network performance.

Snap On MT2500-43 Short Test Lead Jumper: Essential tool for reliable diagnostics. Designed for precision and durability to enhance your testing efficiency.

Eagle Eye LB-480-100-CCD delivers 480V, 100A constant-current DC load testing with auto-sensing voltage, adjustable discharge current, internal data saving, 5" LCD control, and data management software.

AEMC 6240 Micro-Ohmmeter: Rugged low-resistance tester with multiple test currents. 10A Kelvin clips, spring-loaded probes, and DataView software included.