Search results for: 'one'

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.

Fluke CFP-SM-ADD Add-On Kit – Expands CertiFiber Pro OLTS with singlemode capability. Enables Tier-1 certification of singlemode fiber at 1310/1550 nm, providing loss, length, and polarity results. Ideal for upgrading multimode CertiFiber Pro kits.

WOHLER A450 10,000 PPM CO Sensor Set: Your Complete Combustion Analyzer Solution

The Orion 930 Dual Depth Pinless Wood Moisture Meter Kit features the Orion 930, carrying the Wagner tradition of superior accuracy forward with the added versatility of dual depth measurement in wood or other materials. The 930 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth in the shallow mode or from the surface down to .75” (19mm) in the deep scan mode. A flexible rubber boot makes the 930 durable enough to withstand your toughest jobs.

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

The Orion 930 Dual Depth Pinless Wood Moisture Meter Kit features the Orion 930, carrying the Wagner tradition of superior accuracy forward with the added versatility of dual depth measurement in wood or other materials. The 930 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth in the shallow mode or from the surface down to .75” (19mm) in the deep scan mode. A flexible rubber boot makes the 930 durable enough to withstand your toughest jobs.

Wöhler TD 100 Thermal Fast Printer delivers on-site printouts for measurement results with infrared thermal printing for combustion analysis and field documentation.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The Wöhler 3853 Centering Brush Extension adds stable camera rod guidance for VIS inspection work, fitting all camera rods and mounting at any position on the rod for controlled movement in Ø 7.9" pathways.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

AEMC 6240 Micro-Ohmmeter: Rugged low-resistance tester with multiple test currents. 10A Kelvin clips, spring-loaded probes, and DataView software included.

In the unfortunate event that your On-Demand Calibrator is lost or damaged, the Wagner Support Team will work with you to get another paired Calibrator platform delivered in short order so you can be back in business as quickly as possible.

Light and durable polypropylene construction Zinc plated handle, screw jaws and locking bolt Jaw opening: 1" Suction base grips securely on any flat smooth surfaces Ideal for small work, such as hobby, craft, modeling items and more.

Cordless design for easy portability LED indicator light easy to see in dark areas Enclosed viewing window keeps heat in and dust out For Ø7.5 mm glue sticks Power: 7 Watt / 6V Heatup Time: 3 - 4 min Glue Stick: Ø7.5 mm Power Source: 1.5V AA battery x 4 (not included) Running Time: 45 min