Search results for: 'range range ringi'

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

Fluke 568 thermometer combines contact and infrared measurement with 50:1 D:S ratio, rugged design, and wide -40°C to 800°C range for tough jobs.

AEMC 6527 Digital Megohmmeter: Multi-range insulation and continuity tester with voltmeter, audible alerts, and lockable test button for field use.

Compact AEMC MN02 AC current probe with 100A range, 1mA/A output, 1% accuracy and a 5 ft lead — Ideal for low-power and industrial current measurements.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Megger DET2/2 Ground Resistance Tester: Accurate, auto-ranging tester with IP54 waterproof rating. Ideal for reliable earth/ground resistance testing in all conditions.

The Amprobe CO2-100 is a handheld carbon dioxide meter designed for indoor air quality testing. It measures CO2 concentration up to 9999 ppm and simultaneously displays CO2, temperature, and relative humidity on a triple LCD screen. The meter uses NDIR sensor technology and includes dew point, wet bulb, alarm, and data functions.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

AEMC SR661 AC Current Probe: Selectable 10, 100, 1000A ranges, BNC output, wide frequency response, ideal for oscilloscopes and power measurements.

Refurbished Trimble Spectra Precision GL722 Dual Slope Grade Laser Kit with RC703 remote and HL450 receiver. Features PlaneLok, Automatic Axis Alignment and Grade Match Mode for precise construction and road grading.

Compact size, similar to iPhone Autoranging function True-RMS measurement Overload protection Large LCD Includes test leads Display 3 5/6 DC Voltage (V) 6V/60V/600V ±(0.8%+5d) AC Voltage (V) True-RMS 6V/60V/600V ±(1.0%+5d) DC Current (A) 1000mA/10A ±(2.0%+5d) AC Current (A) True-RMS 1000mA/10A ±(2.0%+5d) Resistance (Ω) 600Ω/6K/60K/600K/6M/60MΩ ±(1.0%+5d) Capacitance 6nF/60nF/600nF/6μF/60μF/600μF/6mF/100mF ±(4.0%+5d) Temperature -4°F~986°F ±(3%+5d) / -20°C~530°C ±(3%+5d) Frequency 1000Hz/6KHz ±(2.0%+5d) Safety CATII 600V Battery 1.5V AAA x 2

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

The Wöhler A 450 L Combustion Analyzer Advanced Set delivers residential combustion analysis, burner tuning support, emission measurement, pressure testing, Wi-Fi workflow, and on-site printing.

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

The EXFO FPM-602 is a handheld optical power meter built for fiber link qualification, loss testing, and troubleshooting across a wide range of network types. It uses a Ge detector with a 10 to -70 dBm power range and supports wavelengths from 800 to 1650 nm, making it suitable for common LAN, CWDM, DWDM, and FTTx test applications

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.