Search results for: 'tester fiber'

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Fluke Networks fiber test kit: Accurate SC/SC APC test cords, launch fibers for OTDR, and port protection in a durable, portable case.

Fluke Networks CertiFiber Pro Cable Analyzer: Accurate optical loss testing with auto Pass/Fail analysis, end-face inspection, and industry compliance.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

Fluke Networks FI1000-LC-PCTIP probe tip enables clear LC patch cord inspection with precise video alignment for reliable fiber connector evaluation.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks fiber optic launch cable delivers 105m multimode 62.5µm connectivity with LC/LC connectors for reliable, high-speed network performance.

Fluke Networks singlemode fiber optic cable ensures reliable OTDR testing, LC/LC connectivity, and high-performance network analysis.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke Networks NFC-SWABS-1.25MM fiber optic cleaning swabs are designed for LC and MU ports, delivering precise 1.25mm bulkhead cleaning with lint-free material for effective wet or dry connector maintenance.

Fluke Networks FI1000-LCAPC-BTIP bulkhead video probe tip enables LC/APC fiber connector inspection with FI-1000-series scopes for accurate optical network certification.

Fluke Networks OptiFiber Pro HDR OTDR: Enterprise-ready singlemode fiber-optic tester with HDR range, macrobend detection, and advanced PON testing capability.

MaxTester 720C Fiber Optic OTDR: Compact, high-performance tool for fiber testing. 7-inch touchscreen, Wi-Fi, 12-hour battery life—ideal for contractors on the go!