Search results for: 'powered dc'

Eagle Eye LB-480-300-CCD DC Load Bank delivers constant current discharge testing with integrated data management software for monitoring, recording, and analyzing battery performance across DC systems.

AEMC 607 True-RMS Power Clamp-On Meter: Measures AC/DC volts, amps, power, harmonics & InRush with Bluetooth logging and CAT IV safety.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The Fluke 378 FC is a premium wireless clamp meter featuring FieldSense non-contact voltage/current measurement, True-RMS AC/DC current to 1000 A (expandable to 2500 A with included iFlex probe), built-in power quality indicator and wireless data capabilities — optimized for advanced industrial power diagnostics.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

AEMC 205 Power Clamp-On Meter: TRMS readings for AC/DC volts, amps, power, THD & phase. Built for tough jobs with flame-retardant body & IP54 rating.

Amprobe ACDC-54NAV Clamp Meter: Measures AC/DC up to 1000 A/V, temperature, and power diagnostics with TRMS accuracy and wide industrial jaws.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

Fluke 393 FC delivers CAT III 1500 V true-RMS current testing with iFlex, thin jaw access, polarity audio cues, and IP54 ruggedness for demanding solar and DC work.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

Eagle Eye LB-480-100-CCD delivers 480V, 100A constant-current DC load testing with auto-sensing voltage, adjustable discharge current, internal data saving, 5" LCD control, and data management software.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

Triplett 085010-L7 DC Precipitator Ammeter delivers reliable 0–2A analog current monitoring for electrostatic precipitators and industrial control panels.

SolaHD SCP100S24X-CM delivers regulated 24VDC power for harsh environments, combining IP67 protection, universal AC/DC input, and Class 2 output in a compact chassis-mount industrial power supply.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke BC430/830 AC Adapter delivers efficient 18V DC power for 430-Series Analyzers and 120B ScopeMeters, ensuring fast, reliable charging.