Search results for: 'ringke'

Emerson Ovation 5X00106G31 electronics module for Ovation DCS analog input. Provides 8 isolated 4–20 mA channels with per-channel HART transceivers for device communication. Supports signal acquisition between field devices and the controller.

The PLS 3X360R KIT is a red three-plane laser level featuring 360° horizontal and dual 360° vertical fan angles for plumb, level, and square layout. The kit includes the 3X360R tool, RBP5 Li-ion rechargeable battery pack, power supply, magnetic L-bracket, red reflective target, canvas pouch, and blow mold case.

The Amprobe PRM-6 Phase Sequence and Motor Rotation Tester verifies 3-phase wire sequence and motor rotation direction in commercial and industrial electrical systems. It supports phase-to-phase voltage measurement up to 700 V and features non-contact wireless motor rotation detection for running motors. A backlit LCD display provides clear indication of phase rotation and error conditions. Rated CAT IV 600 V, the PRM-6 is designed for use on electrical systems requiring reliable phase sequence and rotation confirmation.

Fluke 116/323 KIT delivers HVAC multimeter and clamp meter performance with microamp testing, built-in thermometer, and True-RMS accuracy for fast diagnostics.

Fluke 1732/EUS Energy Logger: Log voltage, current, and power with 600V CAT IV safety rating and remote data access via the Fluke Connect app.

AEMC 6240 Micro-Ohmmeter: Rugged low-resistance tester with multiple test currents. 10A Kelvin clips, spring-loaded probes, and DataView software included.

AEMC 5060 Digital Analog Megohmmeter — A 5000V Insulation Tester with USB, DataView® Software, and Advanced Insulation Diagnostics.

AEMC 400D-24 Digital FlexProbe®: True RMS AC current tester with 24ft flexible sensor, 400A range, ideal for tight spaces and CAT IV 600V safety rating.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

Fluke Networks FT630 FiberInspector Pro: Efficient, reliable fiber inspection tool with 250X & 400X magnification. 2-hour battery life for on-the-go testing.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

The PLS 3G KIT is a self-leveling 3-point green laser level designed for fast plumb reference layout. It projects up, down, and forward points with ≤1/8 in accuracy at 30 ft and includes mounting accessories for floor, wall, and magnetic attachment applications.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.