Search results for: 'for up'

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

AEMC AX503 Triple Output DC Power Supply comes with 30V, 2.5A outputs and 5V blind output, master-slave tracking, and LED display. Ideal for labs and testing.

Schneider Electric RPM21BD relay offers reliable 24V DC DPDT switching for RPM-series control systems, with diode protection and compact plug-in design.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

The Schneider Electric GV3P40 is a TeSys Deca motor circuit breaker designed for motor protection applications. This 3-pole device features a thermal-magnetic trip unit with an adjustable thermal protection range of 30 to 40 A and a rated current of 40 A. It supports AC networks up to 690 V at 50/60 Hz and provides defined short-circuit breaking capacities in accordance with IEC 60947 standards.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Mersen High-Speed Cylindrical Fuse: Fast-acting 690VAC protection for inverters, UPS, and motor drives. Reliable, current-limiting, and built for semiconductor safety.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Telergon 400A DC Disconnect Switch: High-performance, 1500V power isolation for solar & industrial use. Reliable, durable, and built for safety!

The Schneider Electric GTK0610 equipment grounding kit is a field-installable grounding kit for Square D F-Series heavy-duty safety switches. It supports copper or aluminum grounding conductors and is designed for switch applications up to 600 V.

Hubbell HBL300FBK female plug delivers 300A single-pole power connectivity for temporary power systems, supporting up to 600V AC/DC with secure cable termination for #6 to 2/0 AWG conductors.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.

The Marlin 1200-J delivers a high-temp Type J male connector for reliable thermocouple connections, using glass-filled thermoset construction for extreme heat performance.