Search results for: 'range range ringi'

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

Light Efficient Design LED-8033E57 delivers 38W LED HID retrofit performance with 5700K daylight output, replacing 175W HID systems for post top and area lighting applications across 120–277V systems.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.

The Delta AFB1224HE is a 24V DC brushless axial cooling fan designed for reliable airflow in electronic and industrial equipment. It features dual ball bearings, locked rotor protection, and a 120 × 120 × 38 mm frame for consistent thermal management applications.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

Ferraz Shawmut (Mersen) USCC1 UltraSafe™ modular fuse holder for Class CC fuses. 1-pole DIN-rail mount design rated 30A and 600VAC/DC with 200kA SCCR. IP20 finger-safe protection, pressure plate terminals, and UL/CSA approvals.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Square D SN0610 insulated groundable neutral assembly kit for 60A/100A heavy-duty safety switches, compatible with Class 3110 F5/F6 Series.

Siemens 5SY4110-7 SENTRON 10A MCB delivers reliable C-curve circuit protection for 230/400V systems, ideal for industrial, commercial, and control panel applications.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.