Search results for: 'used stock'

Fluke MMC-50-LCLC-M multimode fiber optic launch cord ensures precise connectivity and reliable performance for OptiFiber Pro Series cable analyzers.

Fluke Networks MMC-50-FCFC: High-performance 50µ multimode launch cable for reliable connectivity with Pro OTDR and DTX-1800 OTDR devices.

Fluke DSX-PLA011S Network Adapter: Durable Cat 7A/Class FA adapters for fast, reliable RJ-45 connections with DSX-5000 Cable Analyzer.

Fluke Networks QuickClean cleans LC and MU fiber connectors with anti-static design, durable build, and tip extender for hard-to-reach ports.

Fluke JackRapid JR-LEV-1: Terminate jacks up to 8x faster with ergonomic design, built-in wire cutter, and one-handed precision operation.

Fluke MS-IE-Adapter Set: Create complete wire maps, detect miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.

Fluke Networks telecom kit: Complete electrical contractor tool set with Pro3000 Tone & Probe, impact tool, cable stripper, and durable carrying case.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

Fluke Networks SRC-9-SCST-KIT singlemode test reference cord kit for accurate fiber loss testing. Designed for ST-terminated fiber links using SC/ST and ST/ST reference cords with Fluke CertiFiber Pro.

Fluke Networks NFA-CFM-LC Duplex LC Input Adapter enables accurate power and loss testing with CertiFiber Max OLTS, providing a field-replaceable LC interface that protects the test port during duplex fiber measurements.

Fluke Networks ADP-MMC12TO32-1A MMC adapter coupler for verification and inspection of 12, 16, 24, and 32 fiber APC MMC cables when used with compatible Fluke Networks fiber test systems.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

Fluke Networks VisiFault Visual Fault Locator (VFL) – Quickly pinpoint breaks, bends, and faulty connectors in fiber optic cables. The bright red laser makes defects easy to see for fast troubleshooting and verification.

Fluke Networks SFMULTIMODESOURCE multimode light source delivers dual-wavelength 850/1300 nm output for fast, accurate SimpliFiber Pro fiber testing.

Fluke FI-500TP-APC tips provide precise angled physical contact adapter options for FI-500 FiberInspector Micro, supporting SC, LC, 1.25 mm, and 2.50 mm connectors.

Fluke Networks FI-500TP-ALCF adapter tip enables precise LC APC bulkhead fiber inspection with the FI-500 FiberInspector Micro for accurate connector assessment.

Fluke Networks fiber optic network cable delivers single-mode connectivity with MPO/APC to SC/APC ends for reliable high-performance data transmission.

Fluke Networks fiber optic cable delivers reliable single-mode connectivity, SC to LC connectors, and optimal performance for test and network devices.

Fluke Networks OptiFiber Pro HDR Module: High-performance fiber testing for enterprise, datacenter, OSP, and PON networks with USB connectivity.