Search results for: 'module'

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

ProSoft MVI56E MNET provides reliable Modbus TCP/IP client/server communication for ControlLogix systems, enabling seamless integration with Modbus devices.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

The Honeywell C-HPE00 is a rack-mounted control system module used in Honeywell industrial automation environments. The unit consists of a metal card cage assembly with integrated backplane slots and an attached interface board. This listing includes only the hardware shown.

Allen-Bradley 1334-50907 Line/Converter Power Module for Bulletin 1334 AC drives. Internal power board supporting sine-weighted PWM motor control in 5–10 HP variable frequency drive systems.

Banner LM3 photoelectric sensor logic module delivers ON-OFF logic with LIGHT/DARK operate selection for MULTI-BEAM 3- and 4-wire sensors.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Schneider Electric AS-212P-010 Modicon discrete input module provides 12 PNP 24VDC inputs for legacy Modicon PLC systems, enabling reliable sourcing-signal interface from industrial sensors and switches.

The ABB AI845 Analog Input Module (3BSE023675R1) is a high-performance, 8-channel module designed for precise and reliable analog signal acquisition in industrial automation systems. Featuring HART communication support and factory-sealed quality, it ensures seamless integration and long-lasting operation. Upgrade your control system today—order the ABB AI845 module now!

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The Schneider Electric Modicon Quantum 140XCP51000 is a dummy module with integrated terminal strip door designed for unused discrete I/O slots in Quantum PLC racks. It maintains rack mechanical integrity, preserves airflow for cooling, and protects internal backplane components from dust and contact.

Allen-Bradley 1336-RLOAD-SP2A load resistor module engineered for 1336 PLUS, PLUS II, FORCE, and IMPACT drives, providing controlled regenerative and braking energy dissipation in supported voltage ranges.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Siemens TM-E15C24-01 terminal module for ET 200S provides secure spring wiring, supports pre-wiring, and pairs with all 15mm ET 200S electronic modules.