Fluke Networks 732 Items

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

Fluke Networks DSX-CHA-5-GG45 GG45 Class FA Channel Adapter for copper cable certification applications. Designed for GG45 Class FA channel testing configurations. Includes one DSX-CHA-5-GG45 adapter as shown.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Fluke Networks CFM-TRC-S-MPO24U CertiFiber™ Max Test Reference Cord Set for testing single-mode MPO 24 pinned cables. Includes one main and one remote reference cord. Designed for use with the CertiFiber™ Max Optical Loss Test Set and supports standards-preferred one-jumper reference method.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

The Fluke Networks CFM-TRC-S-MPO16U is a CertiFiber™ Max single-mode test reference cord (TRC) kit designed for testing MPO16 pinned fiber configurations. It is used with the CertiFiber Max Optical Loss Test Set (OLTS) to support standards-preferred one-jumper reference measurements.

The Fluke Networks DSX-AXTERM Link Terminator set includes two alien crosstalk link terminators designed for use with compatible DSX series platforms. These terminators provide crosstalk protection and are supplied as a packaged quantity of two units.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

Fluke Networks MMC-50-SCST multimode launch cable with 50 µm fiber and SC/ST connectors. Designed for fiber optic testing applications, this 140-meter launch cable supports network test setups requiring multimode fiber connections.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

Fluke Networks REMOTEID-KIT enables fast remote cable identification with MicroScanner PoE testers. Includes numbered IDs #2–7 for tracing RJ45, Ethernet, telephone, and CATV cabling layouts.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.