Adapters 90 Items

Drone pilots, meet the Autel EVO Nano Battery Charger/Power Adapter: a little powerhouse. This adapter allows you to charge your Nano cells quickly and easily with its foldable prongs and USB-C compatibility. Improve your drone flying skills and experience new heights of freedom with this portable charging system. Soar higher, take more pictures, and go wherever your curiosity takes you. Boost the performance of your aircraft with the Autel EVO Nano Battery Charger.

This adapter is specifically designed for recharging the battery of an Autel Robotics Lite series drone. It features a USB-A port that can be used to connect the charging cable of the drone's Remote Controller. This enables the simultaneous recharging of both the drone's battery and the Remote Controller. It's a convenient solution that ensures both essential components are ready for your next drone flying session. By plugging in the adapter and connecting the relevant cables, you can recharge both the drone's battery and the Remote Controller simultaneously.

USB to RS-232 adapter converts the RS-232 output on the scale or balance to a USB. This enables the scale or balance to be connected to a computer for data transfer. Data transfer and collection is optimized and users don't have to manually input large amounts of data.

The Adam Equipment 6VDC 200mA adapter is designed specifically for CB scales, providing reliable power to ensure accurate weighing results. With this adapter, you can avoid the hassle and expense of replacing batteries, ensuring that your scale is always ready to use.

European Vehicle Software/Adapter Kit – EESP328EUA

Snap On Diagnostics Euro Adapter Kit EAK0301B07C Genuine OEM V-VW-VT

Product Description

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

The DSX-CHA003 coaxial adapters are used in conjunction with the DSX CableAnalyzer to certify coaxial cabling for network and video applications. It supports testing of 50 ohm, 75 ohm, and 93-ohm coaxial cable and its Length-Scaled test limits which automatically adjusts the Insertion Lost limit across the specified frequency range. 

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

Fluke Networks DSX-COAX Coaxial Adapter: Reliable, high-precision testing for 50/75/93 Ohm coaxial cables. Perfect for DSX-5000, ensuring fast, accurate results every time.

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).