Olympus XAAB-0184 5L16-A10 5MHz Phased Array Probe 16-element linear array, 9.6×10 mm aperture, A10 housing, 2.5 m OmniScan connector cable

Olympus XAAB-0184 5L16-A10 Compact 5 MHz Phased Array Probe

The Olympus XAAB-0184 integrates a 5 MHz 16-element linear array with an A10 small-footprint housing and a 9.6×10 mm active aperture. This geometry supports weld and component inspections where access is limited and precise electronic beam control is required. The probe’s OmniScan connector ensures direct use with compatible Olympus phased array instruments.

Small-Footprint Array Configuration

• 16-element linear array with 0.60 mm pitch for controlled beam steering
• 9.6×10 mm active aperture suitable for welds and restricted scanning areas
• A10 housing for compact manual inspections
• Integrated 2.5 m PVC cable with standard OmniScan PA connector

Performance and Platform Compatibility

The standard OmniScan connector provides seamless compatibility with Olympus OmniScan MX, OmniScan MX2, and OmniScan SX instruments. This allows the probe to support sectorial, linear, and compound scanning modes used for weld evaluation, flaw sizing, and structural component assessments. The probe’s compact footprint improves control on curved, machined, or narrow surfaces.

Application Use Cases

• Manual weld inspection across common thickness ranges
• Evaluation of castings, forgings, and machined components
• Pipe and tube inspection where compact probe geometry is required