Moore Industries IPT2/4-20MA/6-30PSIG/35PSI-FA6 Current-to-Pressure Transmitter 4-20mA 6-30psig

The Moore Industries IPT2 is a current-to-pressure transmitter configured to convert a 4-20 mA input into a 6-30 psig pneumatic output. It bridges electronic control systems and pneumatic final control elements by producing a proportional air signal. This configuration supports process environments using DCS, PLC, or PC-based control.

- Converts a 4-20 mA electrical input into a proportional 6-30 psig pneumatic output.
- Uses a closed-loop design to respond quickly to step changes while enhancing accuracy and reducing drift.
- Operates with instrument air so an electronic control signal can drive a pneumatic control signal.
- Uses a larger orifice with an external plunger cleaning mechanism to help clear clogs from the air passage.

- Configured for 4-20 mA input, 6-30 psig output, and 35 psi supply pressure.
- Delivers accuracy of ±0.25% of span, with six-month stability from stated accuracy.
- Provides step response of less than 0.2 seconds into a 100 ml load from 10% to 90% of span.
- Outputs a minimum of 2.0 SCFM while typical air consumption is 0.08 SCFM.
- Operates from -40°F to 176°F and maintains negligible supply pressure effect from 20 to 40 psig steady pressure.

- Converts electronic signals from DCS, PLC, or PC systems into pneumatic control signals.
- Supports pneumatic actuator control in automated process systems.
- Supports pneumatic valve and damper drive control.