Search results for: 'meter to'

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

Fluke FUSE-11A/1000V B5 replacement fuses provide 11A, 1000V protection for Fluke digital multimeters, ensuring safe, reliable overcurrent protection.

T&R 100ADM MK4 Test Set: Precision relay testing with 0-100A output, true RMS metering, and versatile timing. Compact, portable, and built for reliable performance.

For 2.5mm universal SC/ST/FC to 1.25mm LC adaptor head.

Fluke Networks MFTK-MM850-SM1550 – Dual light source kit for MPO fiber testing. Includes 850 nm multimode and 1550 nm singlemode sources for Tier-1 (OLTS) loss, continuity, and polarity verification with the MultiFiber Pro MF-100 power meter.

Fluke FLUKE-355 Clamp Meter: High-current True-RMS AC/DC measurements up to 2000A with wide jaw capacity, surge capture, and CAT IV safety for demanding electrical work.

AEMC 6612 Phase Rotation Meter: Accurately detects 3-phase rotation and live/open phases. LCD display. Ideal 6608 replacement for motor setup.

Fluke 125B/NA ScopeMeter: Rugged 40 MHz handheld oscilloscope with bus health test, dual-input meter, and power analysis for industrial troubleshooting.

AEMC 407 TRMS Clamp Meter: Measure AC/DC volts & amps, power, harmonics, THD, and record 1000 readings. Rugged, IP54, CAT IV 1000V safety rated.

Amprobe THWD-3 digital psychrometer measures humidity and temperature with dew point and wet bulb calculations. Dual display and extended probe support HVAC duct and ambient air diagnostics.

Fluke 80AK-A adapts Type K thermocouples to multimeters using dual banana plugs, enabling accurate temperature measurements across supported Fluke meters.

Fluke MFTK-MM850-SM1310 – Complete MultiFiber Pro OLTS kit with MF-100 power meter and dual light sources (850 nm multimode, 1310 nm singlemode) for Tier-1 MPO loss, polarity, and continuity testing in data-center and telecom networks.

Certified pre-owned Sonatest D1-CABLE-S-QX2 2 meter phased array adaptor cable designed for D1S and D1A probes with Quick I-PEX connector—for seamless PAUT connection and reliable ultrasonic inspections.

INNO Instrument SPA2000 digital power meter with 1 power channel, up to 1000 V and 50 A measurement, DC to 100 kHz bandwidth, 4-display LED readout, harmonic analysis to the 100th order, and USB, Ethernet, RS-232/GPIB, and D/A interfaces.

Fluke Networks FTK1475 SimpliFiber Pro Kit – Fiber testing kit with optical power meter, 850/1300 nm multimode and 1310/1550 nm singlemode sources, and FiberInspector Mini probe for connector inspection and loss verification.

Fluke 125B/NA/S Industrial ScopeMeter combines a 40 MHz oscilloscope, dual multimeters, and bus health testing for fast industrial troubleshooting.

Amprobe ACD-14-PRO: TRMS clamp meter with dual backlit display, Amp-Tip precision, and low pass filter for HVAC and electrical diagnostics.

The Amprobe MO-100 Milliohm Meter offers accurate four-terminal resistance measurement with auto-hold, overvoltage protection, and a portable battery-powered design.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

Fluke MFTK-SM1310 – Complete MultiFiber Pro OLTS kit for Tier-1 singlemode MPO certification. Includes MF-100 power meter and 1310 nm light source for fast, accurate loss, polarity, and continuity testing.

Fluke 190-204-III CAL ScopeMeter offers 200 MHz bandwidth, four isolated channels, deep memory, and traceable calibration for advanced industrial troubleshooting.

Digi-Pas DWL5000XY PC Sync PRO Software brings remote tilt monitoring, 2D leveling, alignment, vibration measurement, and data logging together in one fast, plug-and-play workflow for compatible Digi-Pas systems.