Search results for: 'CHATG'

Fluke FLK-FEV150/TY1 EV Charging Station Analyzer enables fast, safe AC EVSE testing with Type 1 connector, auto control pilot simulation, and guided workflows.

Fluke 810PA AC power adapter provides reliable charging for the Fluke 810 handheld vibration tester and includes an international plug set.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

2-5 Mins quick heat up time 1.5 hour operation time Cordless design to work anywhere Ceramic heater provides stable temperature Drip control prevents unwanted glue on project Status indicator light Convenient USB charging Consumption: 8W Flow Rate: 3g per min Preheating Time: 2 - 5 min Input Voltage: 5V Melting Temperature: 266°F Indicator Light: Blue (In Use) / Green (Fully Charged) / Red (Charging) Glue Sticks: Ø7mm (not included) Charging Time: 200 minutes Operating Time: 90 minutes Power Source: 3.6V Li-ion Battery (2000mAh)

Fluke ESBC290-1 single bay battery charger designed for ii900 series industrial acoustic imagers, delivering reliable charging for proprietary Fluke batteries used in ii900 and ii910 models.

Fluke Networks 30W Power Supply ensures efficient 15V DC output and quick charging for CableAnalyzer devices with US adapter.

Certified pre-owned Sonatest QCG2525 2.25 MHz 1/4" single crystal angle beam shear wave quick change ultrasonic transducer with Microdot connector. Designed for weld, forging, and pipe flaw inspection. Compatible with Sonatest and other flaw detectors.

Certified pre-owned Sonatest PQC253.5, 3.5 MHz, 0.25" single crystal angle beam shear wave ultrasonic transducer with quick change threading—engineered for precise weld inspection and flaw detection in industrial and field NDT. Accepts quick change (QW) wedges for 45°, 60°, 70° shear wave inspection.

AEMC Replacement Battery Charger for DTR 8510 delivers universal 110–240V charging with reliable performance. Ideal OEM replacement for field use.

Fluke FEV100/TY1 & TSL kit tests Type 1 and Tesla AC EV chargers with EV simulation, GFCI checks, grounding pre-tests, and full EVSE safety verification.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Fluke BP290 rechargeable Li-ion battery powers 190-Series II Scopemeter tools with 2400 mAh capacity for extended field use and dependable performance.

Fluke BC430/830 AC Adapter delivers efficient 18V DC power for 430-Series Analyzers and 120B ScopeMeters, ensuring fast, reliable charging.

Compact and portable design Heat up in 15 seconds, cool down in 30 seconds Low power consumption: 8W Temperature range up to 896°F Metal touch-sensitive switch Power indicator to avoid accidental burns Power Supply USB Input DC5V Power Consumption 8W Temperature 896°F (480°C) ± 10% Auto Sleep Mode 25S Indicator LED Light USB Length 1.5M Accessories USB wire, cap, solder stand, and solder wire

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

Fluke FEV100/BASIC EVSE tester simulates an electric vehicle to verify charging station safety, run GFCI tests, and check voltage, duty cycle, and grounding.

Fluke BC190/830 Power Adapter: Efficient 18V DC universal supply for Fluke 190-Series ScopeMeter, supports global voltage input and fast charging.

The Autel Robotics EVO Lite Intelligent Flight Battery steps in as a trusty sidekick or backup power buddy for your EVO Lite drone squad. Sporting some impressive tech – a 6,175mAh, 11.13v lithium polymer battery – this bad boy can keep your drone dancing in the skies for a whopping 40 minutes! That's like having 30% more flight time than those other guys out there. Time to show 'em who's boss!

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

Fluke BP291 rechargeable 4800 mAh Li-Ion battery delivers reliable power for oscilloscopes, analyzers, and acoustic imaging in the field.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.