Search results for: 'range ringi range'

AEMC 407 TRMS Clamp Meter: Measure AC/DC volts & amps, power, harmonics, THD, and record 1000 readings. Rugged, IP54, CAT IV 1000V safety rated.

Digi-Pas DWL90PRO 2-Axis Digital Level delivers 0.05° resolution with simultaneous X/Y leveling, 360° single-axis measurement, magnetic mounting, and Bluetooth remote viewing through the Digi-Pas Smart Levels app.

With its increased cell count and enhanced measurement capabilities, the Si-CA 230 is well-suited for the most robust industrial machinery. Its ability to accommodate a wider range of gases and a high CO tolerance threshold makes it a versatile and excellent choice for applications spanning residential, commercial, and industrial sectors.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Wohler CM 220 Carbon Monoxide Meter delivers handheld ambient CO measurement from 0 to 999 ppm with 1 ppm resolution for gas heating checks, combustion safety screening, and indoor air quality evaluation.

The Axiomatic IC-DR-13 is an analog signal converter designed to accept a standard 4–20 mA input and produce a user-selectable bipolar current output. Output range is jumper-selectable from ±10 mA to ±310 mA in 10 mA steps. The module operates from a 24 VDC nominal supply and is housed in a DIN-rail mount enclosure for industrial applications.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

Fluke 568 thermometer combines contact and infrared measurement with 50:1 D:S ratio, rugged design, and wide -40°C to 800°C range for tough jobs.

AEMC 6527 Digital Megohmmeter: Multi-range insulation and continuity tester with voltmeter, audible alerts, and lockable test button for field use.

Compact AEMC MN02 AC current probe with 100A range, 1mA/A output, 1% accuracy and a 5 ft lead — Ideal for low-power and industrial current measurements.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

GL710 Laser Level: Precision leveling with auto alignment and 30m range. Built for efficiency with long battery life and rugged durability for all your projects.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Megger DET2/2 Ground Resistance Tester: Accurate, auto-ranging tester with IP54 waterproof rating. Ideal for reliable earth/ground resistance testing in all conditions.

The Amprobe CO2-100 is a handheld carbon dioxide meter designed for indoor air quality testing. It measures CO2 concentration up to 9999 ppm and simultaneously displays CO2, temperature, and relative humidity on a triple LCD screen. The meter uses NDIR sensor technology and includes dew point, wet bulb, alarm, and data functions.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

AEMC SR661 AC Current Probe: Selectable 10, 100, 1000A ranges, BNC output, wide frequency response, ideal for oscilloscopes and power measurements.

Refurbished Trimble Spectra Precision GL722 Dual Slope Grade Laser Kit with RC703 remote and HL450 receiver. Features PlaneLok, Automatic Axis Alignment and Grade Match Mode for precise construction and road grading.