Search results for: 'used stock'

Fluke Networks MDC-MDC-SM UPC is a single-mode test reference cord designed for precise optical loss measurements, using reference-grade fiber and UPC connectors for consistent, repeatable Tier 1 testing.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

Pomona 6365 replacement DMM test lead set designed for sheathed banana jack multimeters. CAT III 1000V rated with silicone wire and molded probe bodies for reliable electrical testing.

Pomona 5830-2 Flexible Maxigrabber® Test Clip delivers secure electrical connections using a rotating pincer contact and banana jack interface, supporting custom test leads and reliable probe access.

Fluke I2000 FLEX AC current clamp adapter measures up to 2000 A using Rogowski technology for flexible, non-intrusive current measurement.

Fluke 700PTPK2 Premium Pneumatic Test Pump Kit generates up to 600 psi for fast, accurate pressure testing using no-tools adapters and rugged field-ready design.

The Fluke 1625-2 GEO Earth Ground Tester is a versatile solution for measuring ground resistance and soil resistivity in industrial and utility environments. It supports multiple test methods, including 3-pole, 4-pole, clamp, and selective testing, with onboard data storage for documentation.

Fluke TPAK kit offers a universal magnetic and strap-based hanging system for secure meter placement on panels, pipes, and beams for hands-free operation.

Fluke TL71 test lead set with silicone-insulated, right-angle probes for precise µV measurements. CAT IV 600V, CAT III 1000V rated for safe, reliable testing.

Fluke FI-500TP-A25F adapter tip for 2.5 mm APC SC, FC, and ST connectors, designed for precise fiber end-face inspection with the FI-500 FiberInspector Micro.

Amprobe 5XP-A compact digital multimeter with VolTect™ detection, data hold, and Magne-Grip™ holster for hands-free electrical troubleshooting.

Fluke Networks D914S impact tool delivers precision terminations with torque control, built-in hook and spudger, and ergonomic soft-touch handle.

Fluke Networks LEAD-ABN-PPIN test leads feature durable braided cables, angled bed-of-nails, and piercing pin clips for reliable telecom testing.

Fluke VoltAlert 2AC/90-1000VC detects 90–1000V AC without contact, LED indicator, pocket-sized, battery-powered, ideal for electricians and home use.

Fluke Networks fiber optic cable delivers reliable MPO-to-MPO connectivity for network devices, supporting precise, high-performance testing and data transmission.