Search results for: 'requiring'

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Pomona 4911A-36-2 retractable sheath banana plug patch cord delivers secure 4 mm connections with insulated safety design. Ideal for electrical test setups requiring flexible 36-inch leads.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

Fluke 1623-2 Earth Ground Tester delivers accurate ground resistance and soil resistivity testing with 3- and 4-pole methods, stakeless clamp testing, USB data storage, and rugged IP56 protection.

Fluke BP1730 rechargeable lithium-ion battery pack designed exclusively for the Fluke 1730 Energy Logger, delivering reliable portable power with OEM-approved charging and safety compliance.

Fluke Networks GLD-CFP-100-M Gold Support delivers one-year OEM maintenance for CFP-100-M testers, including calibration, repairs, loaner units, parts replacement, and 24/7 technical support.

Fluke Networks GLD-MF-1550SMS provides 1-year Gold Support for the MF1550SOURCE, including repair coverage, parts and labor, annual calibration, software updates, loaner service, and 24/7 technical support.

Fluke Networks GLD3-CFP-100-Q Gold Support provides 3-year maintenance coverage for CFP-100-Q testers, including calibration, repair, parts replacement, software access, and 24/7 technical support.

Fluke Networks GLD-DSX-OFP-Q-ADD Gold Support delivers 1 year of parts and labor maintenance with 24x7 technical support, software and firmware upgrades, calibration, repair, and loaner coverage.

Fluke Networks GLD3-DSX-8000OI Gold Support provides 3-year maintenance coverage for the DSX-8000OI, including annual calibration, factory refresh, repairs, software updates, and 24/7 technical support.

Fluke Networks GLD3-DSX-8-ADD Gold Support delivers 3-year parts and labor maintenance for the DSX-8000-ADD, including annual calibration, factory refresh, repairs, and 24/7 technical support.

Fluke Networks GLD-OFPQI-MFP Gold Support delivers 1-year exchange service for OFPQI-MFP, including calibration, repair, software updates, loaner equipment, and 24/7 technical support coverage.

Fluke Networks GLD-DSX-CFP-Q-ADDR Gold Support delivers 1-year maintenance coverage for DSX-CFP-Q-ADD-R, including calibration, repairs, parts replacement, software updates, and priority technical support.

Fluke Networks GLD-CFP-100-QI Gold Support provides 1 year of parts and labor maintenance for CFP-100-QI testers, including calibration, repairs, software updates, loaner equipment, and 24/7 technical support.

Fluke Networks GLD-DSX-ADD Gold Support delivers 1-year maintenance coverage for DSX-ADD, including software and firmware updates, calibration, repair services, and 24x7 technical support for uninterrupted testing operations.

Fluke Networks GLD3-DSX-5000MI Gold Support delivers 3-year maintenance coverage for DSX-5000Mi testers, including calibration, repair, software updates, loaner service, and 24/7 technical support.

Fluke Networks GLD-DSX-8000OI Gold Support delivers 1-year maintenance coverage with calibration, repair, parts replacement, software updates, and 24/7 technical support for DSX-8000OI testers.

Fluke FPC3S-II915-1 Premium Care Standard provides 3-year extended coverage with calibration, repairs, accessory replacement, and priority technical support.

Fluke Networks GLD3-MF-1550SMS provides 3-year Gold Support for the MF1550SOURCE, delivering annual calibration, repair coverage, parts replacement, loaner service, and 24/7 technical support.