Search results for: 'size say prevodom'

Compact size, similar to iPhone Autoranging function True-RMS measurement Overload protection Large LCD Includes test leads Display 3 5/6 DC Voltage (V) 6V/60V/600V ±(0.8%+5d) AC Voltage (V) True-RMS 6V/60V/600V ±(1.0%+5d) DC Current (A) 1000mA/10A ±(2.0%+5d) AC Current (A) True-RMS 1000mA/10A ±(2.0%+5d) Resistance (Ω) 600Ω/6K/60K/600K/6M/60MΩ ±(1.0%+5d) Capacitance 6nF/60nF/600nF/6μF/60μF/600μF/6mF/100mF ±(4.0%+5d) Temperature -4°F~986°F ±(3%+5d) / -20°C~530°C ±(3%+5d) Frequency 1000Hz/6KHz ±(2.0%+5d) Safety CATII 600V Battery 1.5V AAA x 2

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Fluke 3140R delivers precise AC current measurement up to 400A and 1000V, compatible with Fluke 1750 for reliable field testing.

LEM USA HAL 200-S Current Transducer: Precision 200A Hall Effect sensing for industrial power systems. Compact, efficient, and high immunity to interference!

Amprobe LH41A clamp-on ammeter delivers precise low-current measurement with 1 mA resolution, data hold, and CAT III 300 V safety.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

Fluke 80i-2010S measures up to 2000A AC/DC on large conductors, enabling safe current testing without disconnecting the load.

Fluke I3000S FLEX-24 AC iFlex current probe measures up to 3000 A using flexible Rogowski technology for hard-to-reach conductors.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Fluke 17B+ DMM offers 1000V/10A measurement, temperature testing, a frequency range up to 100 kHz, and a bright backlit display for reliable daily electrical work.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

Amprobe AMP-210 clamp meter measures AC current up to 600 A with True RMS accuracy, Amp-Tip low current precision, and CAT III 600 V safety.

Fluke ACD-14 PLUS: Dual display clamp multimeter measuring AC/DC voltage, current, temperature, resistance, capacitance, and frequency with ease.