Search results for: 'gamebanan'

Fluke 125B/NA/S Industrial ScopeMeter combines a 40 MHz oscilloscope, dual multimeters, and bus health testing for fast industrial troubleshooting.

Fluke SOL-TI-27HZKIT combines high-efficiency PV I-V curve tracing with 27 Hz thermography for fast, accurate solar performance testing.

Fluke 1577 combines insulation testing and true-RMS multimeter features for motors, generators, cables, and switchgear troubleshooting.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Fluke BK120-T5-600 kit combines a smart circuit breaker finder with a T5-600 tester for fast breaker identification and safe voltage, current, and continuity checks.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

Fluke 279FC/IFLEX thermal multimeter combines TRMS measurement with built-in thermal imaging, iFlex current capability, and wireless Fluke Connect reporting.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

Introducing the OWON HDS272 Handheld Digital Oscilloscope – The Power of Precision, Now in Your Hands.

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Amprobe ACDC-100 clamp-on multimeter measures high AC/DC current with inrush capture, capacitance testing, and a large easy-to-read display.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

Fluke BK120 SmartTrace Breaker Finder accurately locates circuit breakers and detects AC voltage with NCV mode, socket testing, and visual alerts.

The Fluke T+PRO is an advanced electrical tester combining voltage, continuity, and resistance checks with a bright LED bar graph and dual-range measurement. It offers GFCI testing, audible indicators, and vibration feedback for safer troubleshooting in noisy or low-visibility environments.

Introducing the OWON HDS242s Handheld Digital Oscilloscope – Precision, Versatility, and Performance in One Compact Device.

Introducing the OWON HDS307S Handheld Digital Oscilloscope – A Compact Powerhouse of Versatility and Portability, Tailored Just for You.

Fluke SOL-DMM87V-KIT combines a high-efficiency PV I-V curve tracer with an 87V multimeter and 393 FC clamp meter for solar diagnostics.

Fluke FLK-FEV150/TY1 PRO EV Charging Station Analyzer delivers safe AC EVSE testing with Type 1 plug, guided workflows, and advanced TruTest reporting.

Fluke 123B/NA/S ScopeMeter: Rugged handheld oscilloscope with multimeter and recorder, dual-input testing, TFT display, USB, Wi-Fi, and rechargeable battery.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

Fluke 190-502-III-S ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, and rugged portability for industrial and field troubleshooting.

Fluke 87V IMSK Kit: True-RMS multimeter and AC current clamp for precise electrical testing, with temperature probe and CAT IV 600V safety rating.

AEMC OX 5042B Handscope: Portable 3-in-1 oscilloscope, multimeter, and harmonic analyzer with 2 channels, 40MHz bandwidth, and advanced current probes.