Search results for: 'setup taxable'

AEMC MR193-BK AC/DC Current Probe: 1–1300A, 10ft CA lead, Ideal for PowerPad & PEL series items — accurate, high-capacity power and energy monitoring.

AEMC AC/DC Current Probe Model MR6292: Accurate Hall effect probe with hook jaws for BSG mode current measurements. No battery needed; powered by Model 6292.

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

70pcs of 22 AWG solid wires Pre-cut, Pre-stripped and Pre-formed on each end. Variety of colors Completely Reusable 14 lengths x 5pcs each (2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125mm)

T&R PT30-10 High Voltage DC Test System: Reliable, portable solution for cable testing up to ±30kV. Designed for safety with automatic discharge and overload protection.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

Fluke FLK-V3000FC KIT enables wireless voltage and current monitoring with the 3000 FC multimeter and V3000 module, ideal for remote logging and safe diagnostics.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

AEMC SR701 1000A AC Current Probe with 1mA/A output, 52mm jaw, low phase shift, and wide frequency response. Ideal for DMMs, loggers, and power meters.

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

Megger DET4TD Earth Ground Tester: Reliable 100V CAT IV testing with 3-wire & 4-wire modes. IP54 rugged build, 3-hour battery, and high-contrast LCD for precision.

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

The AEMC PEL 52 Power & Energy Logger records voltage, current, power, energy, power factor, frequency, and THD for single and split-phase monitoring.

Introducing the OWON XDM2041 4-4/5 Digits Bench-Type Digital Multimeter: Precision Meets Performance.