Search results for: 'easy currents'

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

Fluke 87-5 CAL Industrial Multimeter: True RMS digital readings, fast peak capture, low-pass filter support, and backlit display for efficient troubleshooting.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

Fluke I17XX-FLEX1500/3PK flexible current probes deliver up to 1500A AC measurement with 12-inch loops and direct connection to 173X energy and power loggers.

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

Triplett 085010-L7 DC Precipitator Ammeter delivers reliable 0–2A analog current monitoring for electrostatic precipitators and industrial control panels.

AEMC MN93-BK AC Current Probe: 240A range, 10ft lead with CA connector—ideal for PowerPad, PEL Series, L104 & L564 for precision current monitoring.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.

AEMC AC/DC Current Probe Model MR6292: Accurate Hall effect probe with hook jaws for BSG mode current measurements. No battery needed; powered by Model 6292.

Amprobe AMP-220 Clamp Meter delivers accurate 600A AC/DC measurements with True-RMS, Amp-Tip, backlit display, and non-contact voltage detection.

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

AEMC SR661 AC Current Probe: Selectable 10, 100, 1000A ranges, BNC output, wide frequency response, ideal for oscilloscopes and power measurements.

AEMC 5217 Multimeter: TRMS 6000-count with NCV, temp, freq, duty cycle, VLowZ, and CAT III safety. Reliable auto-ranging for tough environments.

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

AEMC 400D-24 Digital FlexProbe®: True RMS AC current tester with 24ft flexible sensor, 400A range, ideal for tight spaces and CAT IV 600V safety rating.