Search results for: 'chandika'

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Square D 9998RA81 contact kit restores Size 0 Type B/BH/R contactors with OEM replacement contacts for reliable repair and long-lasting performance.

General Electric 546A301G053 contact kit delivers 4-pole renewal capability for NEMA Size 1 magnetic contactors, supporting reliable electrical continuity and restoration of control equipment performance.

Allen-Bradley 700-C1 rear deck contact cartridge delivers reliable switching functionality for Bulletin 700 relay systems, supporting consistent electrical contact operation in control circuit configurations.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Allen-Bradley 100-D-S1-11 auxiliary contact block adds 1NO/1NC control contacts to 100-D series contactors, offering reliable screw-terminal expansion for industrial panels.

Eaton 6-22-2 restores performance in Citation Series Size 0 contactors with OEM 3-pole replacement contacts for reliable motor control and long-term durability.

Eaton XTCEXSAB01 delivers a reliable 1NC side-mount auxiliary contact for XT Series DILM/DILA contactors, ideal for industrial control and high-intent PLC signaling.

Allen-Bradley 700-C1B Contact Cartridge Series A supports compatible Allen-Bradley control component assemblies with a compact replacement contact cartridge format.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Allen Bradley 100S-C09EJ32BC IEC safety contactor with 9A AC-3 rating and 24V DC electronic coil. Designed for safety feedback circuits using mechanically linked mirror contacts.

HARTING 09150006206 silver-plated Han D female crimp contact with AWG 14 capability delivers reliable 10 A performance and low ≤3 mΩ resistance for industrial connector applications.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Square D 9998 SL-22 contact kit restores a single pole on Type S NEMA Size 0–1 contactors, delivering reliable OEM replacement performance for motor and lighting control.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.