Banner OTBVP6QDH Momentary Optical Touch Button 10–30 V DC PNP Output, Single-Point Optical Sensing, M12 QD Connection, Black Housing

Ergonomic Optical Touch Button for Reliable Machine Control

The Banner OTBVP6QDH is a momentary optical touch button designed as a zero-force, photoelectric replacement for traditional mechanical push buttons. Using single-point optical sensing and non-contact actuation, it provides comfortable, low-strain operation for machine control panels and industrial interfaces while maintaining robust environmental and electrical performance.

Why It Helps

• Zero-force optical activation eliminates the physical pressure required by mechanical push buttons, helping reduce hand, wrist, and arm strain during frequent machine operation.
• Robust environmental protection with NEMA 1, 3, 4, 4X, 12, 13 and IP66 ratings, plus a –20 °C to +50 °C (–4 °F to +122 °F) operating range and up to 90% non-condensing humidity, supports reliable use in demanding industrial environments.
• Simple integration is supported by a 10–30 V DC supply, complementary PNP outputs with NO/NC operation, and an integral M12 quick disconnect for fast installation, replacement, and maintenance.
• Highly resistant to EMI, RFI, and ambient light, the optical sensing design helps maintain stable switching performance in electrically noisy or brightly lit applications.

Key Highlights

• Momentary-action optical touch button with single-point optical sensing provides non-contact actuation as a direct replacement for mechanical push buttons in control panels and operator stations.
• Operates from a 10–30 V DC supply with complementary PNP (sourcing) outputs, supporting both normally open and normally closed operation with 100 ms ON/OFF response times for consistent control signaling.
• Rugged environmental performance includes NEMA 1, 3, 4, 4X, 12, 13 and IP66 ratings, –20 °C to +50 °C (–4 °F to +122 °F) operating temperature, and up to 90% relative humidity (non-condensing) at 50 °C (122 °F).
• Mechanical design features a 30 mm threaded base (M30 x 1.5) for easy mounting in standard oiltight push button holes, with compact dimensions of approximately 59.9 x 43.2 x 48.0 mm for tight panels or multi-device layouts.
• Durable construction with a black polysulfone upper housing, thermoplastic base, and pre-installed black field cover helps protect the sensing area and reduce inadvertent activation from clothing, debris, or stray objects.
• Integral M12 4-pin quick disconnect connection supports fast wiring, easy replacement, and standardization with commonly used industrial cordsets.
• Built-in LEDs indicate power and output status, while high immunity to EMI, RFI, and ambient light improves reliability in electrically noisy or high-light industrial environments.

Applications

• Touch-activated replacement for mechanical push buttons on machine control panels where reduced operator strain and zero-force activation are desired.
• Operator start, stop, and function selection controls on industrial equipment requiring clear visual indication and reliable, non-contact actuation.
• Use in two-hand control or other hand-operated machine interfaces where optical touch buttons provide ergonomic actuation and clear status feedback when integrated with appropriate safety or control logic.
• Applications in environments subject to washdown, dust, or electrical noise where IP66 and NEMA 1, 3, 4, 4X, 12, 13 ratings and strong EMI/RFI immunity support long-term reliability.

With its ergonomic zero-force design, rugged environmental ratings, and straightforward DC PNP interface, the Banner OTBVP6QDH offers a practical and reliable choice for modernizing industrial control stations and improving operator comfort without sacrificing durability or performance.